
德国 Kirchgaesser公司一直致力于创新研发、制造高质量的用于采矿及其他工业领域的防爆测量装置,产品具有极高的精度和可靠性,使用寿命长,免维护,尤其在极端苛刻的工况中占据着欧洲主要的市场份额。 具体产品有流量传感器,压力传感器,温度传感器,液位传感器以及微波探测器及光栅等。
诺希德优势提供德国Kirchgaesser传感器、微波探测器、微波发射器、微波接收器、微波放大器、微粒测量仪、微波接收发射器、矿用流量计、限位开关、信号放大器、流量计、温度计、液位计、物位计、测量系统、检测器 监控仪、、、。详情请联系我公司。
l 取得 ATEX 1/2 D 认证
微波接收发射器(微波探测器): FQR50 / FDR50 、R 11/2- OR 11/2"
微波放大器: FTR 325、FQR 50 / FDR 50
微粒测量仪:PARTIMEX、(PARTIMEX-SRM)、(PARTIMEX-SRM)
远程运算器 (PARTIMEX-A*) MARKING: I M1 EEX IA I ( 01 ATEX E 167)
矿用流量计:MIDEX
Kirchgaesser代表型号有:MIDEX、MIKRO-/MINIMIDEX-A MIT MXR、MID-EX-E、MIKRO-/MINIMIDEX-E、MIKRO-/MINIMIDEX-E2、MULTIMIDEX、PEMEX-E、PEMEX-LC、TEMEX、RASOMEX、UMINEX、BRUNNENSYSTEM PEMEX-BS、ULTRAMEX、FLUWEX-A MIT MXR、PARTIMEX、SOLWEX20、MESS-SYSTEM SYMEX、AQUACONEX、FDR 50 / FQR 50、FDR 50 / FQR 50 (EDELSTAHLAUSFüHRUNG)、SCHALTVERST?RKER FTR 325、KüHLWASSER-STEUERGER?T AQUACONEX、MID-EX-E、、、
Magnetic-inductive flow meter
 |  | MIDEX
- Digital local display
- Max. 8 signal outputs e.g. frequency 5 - 15 Hz
- Refrigeration capacity measurement (up to 20,000 kW)
- Nominal width: DN50 to DN300
- Nominal pressure: PN10 to PN500
- Measuring range: max. 2000 m³/h and 1000 l/min respectively
|
 | MIKRO-/MINIMIDEX-A with MXR
- Evaluation unit with remote transducer
- Max. 2 signal outputs e.g. frequency 5 - 15 Hz
- Nominal width: DN10 to DN31
- Nominal pressure: PN100 to PN500
- Measuring range: max. 800 l/min
|
 | MID-EX-E
- Compact and robust flow meter with optional integrated pressure measurement
- Replaces older flow meters MIKRO-/MINIMIDEX-E/-E2
- Signal outputs: frequency, limit, current or voltage
- Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to DN31
- Nominal pressure: PN100 to PN500
- Measuring range: max. 400 l/min and 400 bar respectively
|
 | MID-EX-C
- Compact and robust flow transducer for small flow rate to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to DN31
- Nominal pressure: PN100 to PN500
- Measuring range: max. 400 l/min and 400 bar respectively
|
 | MID-EX-GC
- Compact and robust flow transducer for high flow rate to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Nominal width: DN50 to DN300, optional with high pressure couplings
- Nominal pressure: PN10 to PN160
- Measuring range: max. 1000 l/min and 2000 m³/h respectively
|
 | MULTIMIDEX
- Compact four channel flow meter
- Signal outputs: frequency, serial, CAN
- Nominal width: DN12
- Nominal pressure: PN100
- Measuring range: 0 - 50 l/min
|
Pressure meter
 |  | PEMEX-E
- Digital local display
- Max. 2 output signals (frequency 5 - 15 Hz, limit)
- Measuring range: max. 1000 bar
- Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or - Pipe thread G½, internal ceramic sensor or - Pipe thread G½, flush-mounted thinfilm sensor or - Pipe thread G½, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
|
 | PEMEX-LC
- Compact pressure meter
- Output signal:
- Frequency 5 - 15 Hz or - Voltage 1 - 5 V or 1 - 10 V - Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) - Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or - Pipe thread G½, internal ceramic sensor or - Pipe thread G½, flush-mounted thinfilm sensor or - Pipe thread G½, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
|
 | PEM-EX-C
- Compact pressure transducer for connection to a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) - Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or - Pipe thread G½, internal ceramic sensor or - Pipe thread G½, flush-mounted thinfilm sensor or - Pipe thread G½, internal thinfilm sensor or - Pipe thread G¼, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
|
Temperature meter
 |  | TEMEX
- Digital local display
- Max. 2 output signals (frequency 5 - 15 Hz, limit)
- Measuring range:
-20°C to +70°C (quartz sensor) or -20°C to +150°C (semiconductor sensor) - Various programmable functions like:
- Limit detection - Simulation of measuring value - Error diagnosis
|
 |  | TEM-EX-C
- Compact temperature transducer for connection to a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring range:
Selectable in the range of -20°C to +150°C acc. to the table of versions (other measuring ranges are available on request) - Process connection:
- Thread G½ - Selectable length of sensor
|
Level meter
 |  | RASOMEX
- Measuring principle: Radar
- Output signal:
- Frequency 5 - 15 Hz or - Current 4 - 20 mA or - Voltage 0.4 - 2.0 V or - Voltage 1 - 5 V or - Voltage 1 - 10 V and - Alarm output (potential-free optocoupler) - Measuring range: max. 70 m
- Microprocessor-controlled evaluation unit RASOMEX-S with remote display and operation unit RASOMEX-A
|
 | UMINEX
- Measuring principle: Ultrasonic
- Output signal:
- Frequency 5 - 15 Hz - Max. 3 programmable relay outputs - Evaluation unit with LC-display
- Measuring range: max. 3 m for solids and 8 m for liquids
|
 | PEMEX-BS
- Mobile evaluation unit PEMEX-BSA with remote transducer PEMEX-BSS
- Level measuring in pressureless (deep) springs or in water towers
- Measuring range: 0 - 10 m to 0 - 250 m
- Max. cable length of transducer: 2000 m
- Microprocessor-controlled evaluation unit with following features:
- Memory for up to 35 measuring values - Power supply with (rechargeable) batteries (4x type AA) - Internal LC-display - Serial interface to transfer measuring values to PC - Software to transfer measuring values to Microsoft Excel®
|
 | ULTRAMEX
- This measuring device was replaced by the new level meter RASOMEX.
|
Magnetic-inductive flow monitor
 |  | FLUWEX-A with MXR
- Digital local display
- Max. 2 signal outputs (e.g. frequency 5 - 15 Hz)
- Measuring range: 0 - 5 m/s
- Extensive functionality like
- Limit generation - Simulation of the measuring value - Error diagnosis
|
Particle meter
 |  | PARTIMEX
- Digital local display
- Output signal:
- Frequency 5 - 15 Hz, - Current 4 - 20 mA or - Voltage 0.4 - 2.0 V and - Max. three programmable optocoupler outputs - Measuring range (level of intensity):
10 to 100 (detection of particles < 5 µm) - Wide functionality like
- Limit detection - Simulation of measuring values - Remote diagnosis
|
Microwave barrier
 |  | SOLWEX20
- Features:
- LED field strength display - Selectable pull-in/drop-out delay - Current monitoring of emitter/receiver - Output signals:
- 3 optocoupler outputs (switching and alarm) - Max. 2 optional relay outputs (change-over contact) - Detection range: max. 20 m
|
Control systems
 |  | AQUACONEX
- Cooling water control for up to two motor circuits
- Signal outputs:
Frequency 5 - 15 Hz, pulse or limit (programmable) and one relay contact (change-over switch) - Measuring range: 0 - 30 l/min (per circuit)
- Different maintenance and cleaning facilities
|
Microwave barrier
 |  | FDR50/FQR50
- Contact-free detection of all types of bulk solids
- Suitable as level limit switch and for counting bulk solids
- Detection range: max. 20 m
- Process connection:
- Thread R1½ (EN 10226) or - Thread 1½ NPT (ANSI/ASME B1.20.1) - Conforms to:
- ATEX II 1/2D - ATEX II 1/2GD - IECEx
|
 | Switching amplifier FTR325
- 1-channel switching amplifier for the microwave barrier FDR50/FQR50
- High level of operational safety through line monitoring up to the sensor
- LED display of operating and switching state
- Selectable pick up and/or drop out delay of the switching output
- Compact housing for easy inline mounting on standard rack rails
|
Level meter
 |  | FMM50
- Electromechanical level measuring system for heavy-weight grained bulk solids and for liquids
- Traction power: max. 500 N
- Output signal:
- Current 0/4 - 20 mA and - Max. 6 programmable relays - Measuring range: max. 70 m
- Power supply:
180 - 253 VAC, 50/60 Hz or 90 - 127 VAC, 50/60 Hz - Optional design with certification for applications in areas subject to dust explosion hazard zones 20, 21 and 22, category 1/2D
|
 |  | FMM20
- Electromechanical level measuring system for lightweight grained bulk solids and for liquids
- Traction power: max. 150 N
- Output signal:
- Current 0/4 - 20 mA and - Max. 4 programmable relays - Measuring range: max. 32 m
- Power supply: 90 - 253 VAC, 50/60 Hz or 20 - 28 VDC
- Optional design with certification for applications in areas subject to dust explosion hazard zones 20, 21 and 22, category 1/2D
|
 |  | COMBA-EX
- Evaluation and display unit for up to 4 transducers
- Possible transducers:
- PEM-EX-C (pressure) and/or - TEM-EX-C (temperature) and/or - MID-EX-C (small flow) and/or - MID-EX-GC (high flow) - Automatical detection of the connected transducers (type and measuring range)
- Output signal:
Frequency 5 - 15 Hz - No parameterizing or programming required
- Maintenance-free
|
 |  | MID-EX-C
- Compact small flow transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring range: max. 400 l/min
- Nominal width: DN10, DN19 and DN25,
optional with plug couplers DN10 to DN31 - Nominal pressure: PN100 to PN500
|
 |  | MID-EX-GC
- Compact high flow transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring range:
max. 1000 l/min and 2000 m³/h respectively - Nominal width:
DN50 to DN300, optional with high pressure couplings - Nominal pressure: PN10 to PN160
|
 |  | PEM-EX-C
- Compact pressure transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) - Various process connections
|
 |  | TEM-EX-C
- Compact temperature transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively
- Measuring ranges:
Selectable in the range of -20°C to +150°C acc. to the table of versions (other measuring ranges are available on request) - Process connection:
- Thread G½ - Selectable length of sensor
|
微波接收发射器(微波探测器):型号: FQR50 / FDR50
功能特点:
l 可以对所有散装固体材料进行非接触式、无磨损式检测
l 微波探测器在测量过程中采用的是非接触式方法,因此可以安装在集装箱,排水管道或者矿井里面。微波可以从外部穿透非金属材质进行测量。
l 可以用作限位开关来对所有散料进行控制和测算。主要包括:木屑,面粉,石膏,水泥,纸屑,纸板碎片,砂砾,沙子,有干燥粉尘,包装袋,包装盒。
l 前端平齐,非接触式装置
l 机械材质坚固,无磨损,寿命长,无需维护
l 对接收器上的信号强度进行指示
l 灵敏度可以人工调节
l 使用 R 11/2- or 11/2" NPT- 螺纹即可简单安装
德国KI Kirchgaesser 公司 产品有:
流量计:MIDEX MIKRO MINIMIDEX MID-EX-C MID-EX-E MID-EX-GC MULTIMIDEX FLUWEX-A 系列
压力和温度传感器:PEMEX-E PEMEX-LC PEM-EX-C TEMEX TEM-EX-C 系列
液位传感器:FMM20 FMM50 PEMEX-BS UMINEX RASOMEX 系列
微波探测器及其他: SOLWEX20 FDR50 FQR50 PARTIMEX COMBA-EX FTR325系列
德国KIRCHGAESSER矿用流量计,压力传感器,温度传感器,液位计,微波栅,微波接收发射器.
型号包括: FDR50,FQR50,FTR325,MIDEX,MIKROMIDEX,MINIMIDEX,MIDEX-E,MULTIMIDEX,PEMEX-E,PEMEX-LC,PEMEX-C,TEMEX,RASOMEX,UMINEX,PEMEX-BS, FLUMEX-A,PARTIMEX,SOLWEX20,SYMEX,AQUACONEX,COMBA-EX,FMM50,FMM20
德国KIRCHGAESSER微波(料位计)接收发射器功能特点:
1,可以对所有散装固体材料进行非接触式、无磨损式检测
2,微波探测器在测量过程中采用的是非接触式方法,因此可以安装在集装箱,排水管道或者矿井里面。微波可以从外部穿透非金属材质进行测量。
3,可以用作限位开关来对所有散料进行控制和测算。主要包括:木屑,面粉,石膏,水泥,纸屑,纸板碎片,砂砾,沙子,所有干燥粉尘,包装袋,包装盒。
4,前端平齐,非接触式装置
5,机械材质坚固,无磨损,寿命长,无需维护
6,对接收器上的信号强度进行指示
7,灵敏度可以人工调节
8,使用 R 11/2- or 11/2" NPT- 螺纹即可简单安装
德国KIRCHGAESSER矿用流量计,KIRCHGAESSER压力传感器,KIRCHGAESSER温度传感器,KIRCHGAESSER液位计,KIRCHGAESSER微波栅,KIRCHGAESSER微波接收发射器.