High-speed cutting machine for metal band saw

source:Industry News release time:2021-06-21 Article author:Rosit Popular:Air band saw

　　The appearance of a CNC lathe is similar to that of an ordinary lathe, that is, it consists of a bed, a headstock, a tool post, a feed system pressure system, a cooling and lubrication system and other parts. The feed system of the CNC lathe is qualitatively different from the ordinary lathe. The traditional ordinary lathe has a feed box and an exchange gear frame, while the CNC lathe directly uses a servo motor to drive the slide and the tool post through a ball screw to realize the feed movement. The structure of the feed system is greatly simplified.

　　The installation height of nurseries, kindergartens and primary schools and other children's activities places shall not be less than 1.8m. The power distribution room and self-provided emergency power distribution room are used to install and arrange high-voltage switch cabinets, transformers and low-voltage power distribution cabinets. 1. The location of the substation and distribution room should be selected based on (1) Connecting to the load center (2) Convenient for incoming and outgoing lines (3) Connecting to the power supply side (4) Equipment hoisting and transportation are convenient (5) It is not suitable to be installed in a place with severe vibration. ⑹It is not suitable to be installed in dusty, foggy or corrosive gas places. When it cannot be far away, it should not be installed on the leeward side. ⑺ It is not suitable to set up in low-lying places where water is easy to accumulate. ⑻It should not be set up on the first floor below the basement. If there is only one floor, the location should be raised appropriately. 2. The form of the substation (1) Substation inside the building (2) Substation attached outside the building (3) Independent substation (4) Box-type substation 3. Design requirements for high voltage switch room: (1) The door should be outward The opened fire door should be able to meet the conditions for equipment handling and personnel entry and exit. ⑵Fixed natural lighting should be provided when available.

　　GB series metal band saws are mainly used for sawing various ferrous and non-ferrous metals. It has the advantages of narrow sawing edge, material saving, energy saving, high sawing accuracy, convenient operation, high production efficiency, etc. The main components of the sawing machine are bottom seat; bed, column; saw beam and transmission mechanism; guide device; workpiece; tension device; feeding Frame; hydraulic drive; electrical control; and cooling; the base is a box-shaped structure welded by steel plates, and the bed and column are fixed on it. There is a large space in the inner cavity of the base. The front left is the electrical button control box, and the right side It is an electrical switchboard box with a hydraulic oil tank welded from steel plates in the middle, equipped with a hydraulic pump station and hydraulic pipelines.

　　But it requires good interaction between individuals and organizations [3]. Therefore, when choosing a governance model for small farm water projects, it is necessary to choose an appropriate governance model according to the actual needs of different regions. 2.3 Selection of Ecological Environmental Protection Factors Ecological and environmental protection are the basic directions for the development of small farmland water conservancy projects. The governance of small agricultural water projects directly affects the utilization of water resources. The rational and reasonable utilization of water resources requires special treatment technologies and methods for small-scale farmland water use projects. Therefore, the process of choosing a model for small farmland irrigation projects must be strictly followed. Choose ecological principles, ecological means. In the management of individual units, many farmers lack professional knowledge and experience in the treatment of small-scale farmland water conservancy projects. Therefore, it is necessary to incorporate scientific small-scale farmland water conservancy engineering technology into the management of small-scale farmland water conservancy projects. Need to cooperate with professional water organizations. Ensure the efficiency of resource utilization. In general, the choice of governance model for small farm water projects directly affects the governance efficiency of small farm water projects.

　　Therefore, when making a construction plan, you need to understand the difference between urban and rural areas, and rural buildings should have their own characteristics, such as a spacious courtyard, to be able to produce or store machinery. The construction of rural houses must include biogas digesters. Therefore, when planning the layout, it is necessary to effectively connect the biogas digesters, pig pens, toilets and kitchens, and arrange the pipes reasonably, which should be easy to use. The second is to emphasize the purpose of the building. 2 Building durability studies have shown that it is common for farmers and local masons to combine their experience to construct housing when it comes to basic treatment of rural housing. This will make the foundation fragile and more likely to affect security. The longevity of houses and the construction of rural houses at the time of construction lack scientific seismic design or are not involved. The structural design lacks rationality. For example, the beam has a large span and a small cross-section. For floor reinforcement, only the quality of the main reinforcement is emphasized, while the structural reinforcement is ignored. Farmers are pursuing more and more use functions. On the right side is the cooling fluid tank and the water pump. The bed is made of cast iron and fixed on the base. The column is composed of a large and small column. The big round column is used as a guide rail for the saw frame to support the saw beam up and down movement and ensure the guidance , The small cylinder works to ensure the normal cutting of the saw blade. In the middle is a clamping vise and a manual feeding mechanism. The front of the vise is connected with a workbench for receiving finished parts. The left device is a screw rod that passes through the inner hole of the hydraulic cylinder rod. Turn the handwheel or press the button to make the left jaw Move left and right. 2: Application: Mainly used for cutting materials in machinery, forging, processing, etc.

　　This article analyzes the shortcomings of rural buildings and discusses the precautions related to the design of new rural residential buildings. Although the total housing area is large, more than half of it is rural housing area, but from the perspective of rural housing, there is no complete management model and plan design. According to traditional concepts and models, the structure and style are relatively similar. It is not conducive to find out the shortcomings of the service life of the house, the rationality of the space structure, whether it meets the needs of daily life, the beauty of the style, and whether the structure is environmentally friendly and energy-saving. 1 Construction function and form Most rural families do not know about decoration issues. This is because the rural people do not have proper knowledge of decoration. When building houses, they think this is a trend that imitates urban architecture and installs large glass doors and windows commonly found in urban shops, but it is not only unsightly. It also doesn't work. Some things (such as exterior wall tiles) have been eliminated by cities and are widespread in rural areas. Some villages require porcelain to be placed on the outer walls when constructing new houses.