Language

English Espana Deutschland Chinese

Visitor Center

My Wish List Last Viewed Products

English Espana Deutschland Chinese

My wish list Last viewed products

You are here: > Home > News > Industry News

News

sawing machine

source:Industry News release time:2021-06-26 Article author:Rosit Popular:Air band saw

　　sawing machine!Maintenance of the sawing machine Before operating the machine, the sawing machine should also be checked to see if it is suitable for starting up. If there is a need for adjustment and processing but not processing, it may damage the machine tool or affect the processing quality at the beginning of use. Let's talk about what aspects of the sawing machine should be checked before use.

　　1. Check the position of the chip cleaning brush, adhere to the removal of tooth grooves and iron filings, and adjust or replace the chip cleaning brush if necessary. Check the height of the chip cleaning steel brush so that the steel brush just touches the bottom of the serration. It should not be higher than the bottom of the saw teeth, as this will cause excessive wear of the saw band or steel brush.

　　2. Check the position of the oil gauges of the gear box and hydraulic box, whether there is a need to increase gear oil 150# and hydraulic oil 32#;

　　3. Check whether the cooling water altimeter has increased demand;

　　4. Check whether the orientation of the saw band on the main and passive wheels and the tungsten steel guide blade is correct;

　　5. Check the saw band tension adjustment valve to select the appropriate sawing pressure; the maximum tension of the high-speed hacksaw band is 55klbs/in2

　　6. Check that the pressure of the tungsten steel oil pressure gauge is 30+2kg/cm2;wall mounted home energy storage system

　　7. Check the tension belt of the gear box;

　　8. Before installing a new saw band, remove the iron filings from the flanges of the driving and driven wheels (the iron filings may accumulate).

　　Second, just as the car needs regular maintenance, the sawing machine needs to be maintained and replaced after a period of use, so that the sawing machine can operate normally.

　　1. Replacement of steel brush. The steel brush can remove the iron filings on the saw band and prevent the iron filings from being carried into the saw wheel or even the saw band guide. It is suitable for the main side. The steel brush of the fault device will cause excessive wear of the saw band or steel brush, and will also cause instability during sawing.

　　2. Cooling water replacement When the coolant is to be replaced under normal use, the iron filings in the cooling water storage tank must be cleaned up every three months.

　　3. Replacement of hydraulic oil The hydraulic oil should be replaced every six months.

　　4. Replacement of gear oil The gear oil must be replaced after less than six months or 1200 hours of use.

Read recommendations:

RH21-4500 Pneumatic Chipping Hammer

LH61-020 Emulsion Hoist

Drill Bit Extension Rods丨DC88 Series

Hydraulic Pump Station

The Scope of Use of Air Chipping Hammers

Previous:test machine of the sawing machine Next:saw blades for metal band sawing machines

related articles

Using Chainsaws to Cut Snow?

What to do if the pneumatic wrench is weak

Hydraulic chain saw

Operation of the wrench

Introduction to the principle of pneumatic wrench

How to use the pneumatic wrench

Brief introduction to the principle of pneumatic wrench

Impact pneumatic wrench

Correct hydraulic wrench operation procedure

Hydraulic wrench torque pressure conversion

Field operation procedure of hydraulic wrench

Hydraulic radial plunger motor

The history of hydraulic motors

Principle of balance hydraulic wrench

The Price Factor of Smart Electric Torque Wrench

Introduction to the advantages of using intelligent electric torque wrench

The Price Factor of Smart Electric Torque Wrench

Classification and use of wrenches

hydraulic wrench pressure conversion

Introduction to the advantages of the use of intelligent electric torque wrench

Smart Electric Torque Wrench Selection Guide

Intelligent electric torque wrench for wind power generation

Uses of open-end wrenches.Pneumatic chainsaw

What are the driving parts of a hydraulic wrench and what they do

What are the driving parts of a hydraulic wrench and what they do

the commonly used wrenches

Introduction of several common wrenches

Application scope and daily maintenance method of hydraulic bolt tensioner

Characteristics of hollow hydraulic wrench and precautions for use

Characteristics and precautions of driving hydraulic wrench

Power Tools

RH31-1550 Hydraulic Chipping Hammer

AN23-750 Pneumatic Torque Wrench (Angle Shank)

AN51-6000 Electric servo CNC Torque Wrench

LH61-020 Emulsion Hoist

AN32-10000 Hollow Hydraulic Wrench

LH22-003 Pneumatic Hoist

CS21-085 Pneumatic Handheld Circular Saw

LW21-010 Pneumatic Winch

RZ21-020 Pneumatic Rammer

CN22-6075 Nut Cutter丨Split-type Nut Cutter

CF21-020 Pneumatic Cutter

CC21-430 Pneumatic Chainsaw (3.0 kw Series)

AN21-100 Pneumatic Nut Runner

DP22-220 Pneumatic Column Drill

AN32-17000 Hollow Hydraulic Wrench

GG21-230 Pneumatic Angel Grinder

DA21-015 Pneumatic Angle Drill

LH61-025 Emulsion Hoist

CC23-380 Pneumatic Chainsaw Heavy-Duty (3.5KW Series)

DM11-100 Electric Magnetic Drill

CR21-010 Heavy Pneumatic receprocating Saw

AN31-100000 Hydraulic Torque Wrench

LH61-015 Emulsion Hoist

DA21-022 Pneumatic Angle Drill

DM11-080 Electric Magnetic Drill

GG11-125 Electric Angle Grinder

LW21-025 Pneumatic Winch

LW21-003 Pneumatic Winch

AW22-2000 Pneumatic Impact Wrench (Ultra-Light Series)

OW64-020 Integrated Emulsion Mining Waterjet Cutting Machine

Accessories

Alloy Saw Blades丨CR811-150/152

Shovel Blades

Alloy Drill Bits丨813 Series

Alloy Twist Drill Bits丨DB81 Series

Grinding Disc

Abrasive Blades

Alloy Saw Chains丨CC812/CC816 Series

Hard Alloy Hollow Drill Bits assy.丨DB85 Series

Drill Bit Extension Rods丨DC88 Series

Chisels

Integrated Hollow Drill Bits丨DC81

Alloy Drill Bits丨811 Series

Hydraulic Pump Station

Regular Saw Chains丨CC811 Series

Pin

Alloy Drill Bits丨812 Series

Alloy Saw Blades丨CR816 Series

Ex-proof Sleeves KIT

Pipe Fixed Clamps丨CB861-18

Diamond Saw Blades

Alloy Saw Blades丨CR814 Series

Ex-proof Sleeves

Carbide Hollow Bits丨DM816 Series

Filter assy.

Core Drill Morse Taper Sleeves

Alloy Saw Blades丨CR812 Series

Split Hollow Drill Bits丨DC82

Alloy Saw Blades丨CR811 Series

Carbide Inserts Twist Bits assy.丨DB83 Series

Alloy Sleeves

CONTACT: +49 69 6780 8096; +49 69 6780 8326; info@rosit.eu

COMPANY INFO

ABOUT NEWS
PRODUCT SUPPORT

WARRANTY TOOL MAINTENANCE FAQs
CUSTOMER SERVICE

SERVICE CENTER CONTACT US Enquiry
CONTACT

+49 69 6780 8096 +49 69 6780 8326 info@rosit.eu
Follow Us