You are here: > Home > News > Industry News

Work before Using the Pneumatic Hoist

source:Industry News release time:2021-02-23 Article author:Rosit Popular:Air band saw

  First of all, the pneumatic hoist should be tested to ensure normal operation before it is put into use after being assembled. Hang the pneumatic hoist to a suitable place, use a suitable hoist and rated load, connect the air source, run, check and adjust under the appropriate working pressure.

Hoists Deliver Special Performance Throughout Industry - ROGTEC

  Secondly, check the control operation. Press the control lever briefly to confirm that the running direction of the hook is consistent with the control direction. If the operating direction of the load hook is opposite to the control direction, the control hose is installed incorrectly.

  When each control lever on the control lever is pressed fully, the control lever can be released completely.If the control rod cannot be released completely, the corresponding positioning screw on the cylinder should be turned.

  Thirdly, put the rated load on the lower hook and check the operation of the hoist.

  Operate the hoist to lift the load. When the control is released, the hoist should stop and keep the load in that position.wall mounted home energy storage system

  Operate the hoist to lower the load for a short distance, and then release the control. The hoist should stop and keep the load at that position.

  Operate the hoist to lower the load, observe the speed when the hoist is lowered, and adjust the lowering or raising speed to get the desired speed.

  Rosit is a leader in the global power tool service market. We take electric, pneumatic and hydraulic drive technology as the core. Our product categories mainly include hand tools, instruments, workshop equipment and fixed tools, labor protection products, industrial equipment,chemicals and so on.

  At the same time, we provide customers with a series of system solutions and communication channels to help customers improve procurement, inventory, logistics and management costs.


Read recommendations:

RH21-2300 Pneumatic Chipping Hammer

AW21-1200 Pneumatic Impact Wrench (Ex-proof Series)

Abrasive Blades

Carborundum saw Blades

How to Maintain the Pneumatic Hoist?

Previous:What Are the Advantages of Pneumatic Winch? Next:Use of the Submersible Pump

related articles

Using Chainsaws to Cut Snow?

2024-05-21

What to do if the pneumatic wrench is weak

2022-12-19

Hydraulic chain saw

2022-12-13

Operation of the wrench

2022-12-06

Introduction to the principle of pneumatic wrench

2022-11-28

How to use the pneumatic wrench

2022-11-21

Brief introduction to the principle of pneumatic wrench

2022-11-14

Impact pneumatic wrench

2022-11-07

Correct hydraulic wrench operation procedure

2022-11-01

Hydraulic wrench torque pressure conversion

2022-11-01

Field operation procedure of hydraulic wrench

2022-10-24

Hydraulic radial plunger motor

2022-10-17

The history of hydraulic motors

2022-10-17

Principle of balance hydraulic wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Introduction to the advantages of using intelligent electric torque wrench

2022-10-10

The Price Factor of Smart Electric Torque Wrench

2022-10-10

Classification and use of wrenches

2022-10-10

hydraulic wrench pressure conversion

2022-10-10

Introduction to the advantages of the use of intelligent electric torque wrench

2022-10-10

Smart Electric Torque Wrench Selection Guide

2022-10-10

Intelligent electric torque wrench for wind power generation

2022-10-09

Uses of open-end wrenches.Pneumatic chainsaw

2022-10-08

What are the driving parts of a hydraulic wrench and what they do

2022-09-30

What are the driving parts of a hydraulic wrench and what they do

2022-09-23

the commonly used wrenches

2022-09-22

Introduction of several common wrenches

2022-09-21

Application scope and daily maintenance method of hydraulic bolt tensioner

2022-09-20

Characteristics of hollow hydraulic wrench and precautions for use

2022-09-19

Characteristics and precautions of driving hydraulic wrench

2022-09-17

Power Tools

CN21-1424 Nut Cutter丨Manual Integrated Nut Cutter

2022-12-12

RZ21-016 Pneumatic Rammer

2023-06-27

DM11-120 Electric Magnetic Drill

2023-06-19

CB11-260 Electric Band Saw

2023-06-16

AN31-120000 Hydraulic Torque Wrench

2023-06-27

CN22-4150 Nut Cutter丨Split-type Nut Cutter

2023-06-17

AK21-130 Pneumatic C-Hog Ring Plier (1.5 coil)

2023-06-29

CR21-008 Light Pneumatic Reciprocating Saw

2020-06-13

DM11-023 Electric Magnetic Drill

2023-06-19

OF23-880 Pneumatic Fan/ (light/medium)

2023-06-28

GG11-140 Electric Angle Grinder

2023-06-28

AK71-130 Manual C-Hog Ring Plier (1.5 coil)

2022-12-12

AW22-4000 Pneumatic Impact Wrench (Ultra-Light Series)

2021-06-15

DH21-050 Pneumatic Hammer Drill

2021-06-10

CN22-6075 Nut Cutter丨Split-type Nut Cutter

2023-06-17

AN51-8000 Electric servo CNC Torque Wrench

2023-06-27

CN22-2434 Nut Cutter丨Split-type Nut Cutter

2023-06-17

CC22-430 Pneumatic Chain Saw (5.0KW Series)

2023-06-14

RC21-1500 Pneumatic Long Reach Scalers

2023-06-27

AN31-15000 Hydraulic Torque Wrench

2023-06-27

CB11-310 Electric Band Saw

2023-06-16

AK22-130 Pneumatic C-Hog Ring Plier (2.0 coil)

2023-06-29

CN22-70115 Nut Cutter丨Split-type Nut Cutter

2022-12-12

DM31-016 Hydraulic Magnetic Drill

2023-06-19

AK21-065 Pneumatic C-Hog Ring Plier (1.5 coil)

2023-06-29

AN21-100 Pneumatic Nut Runner

2021-06-15

AN21-400 Pneumatic Nut Runner

2022-12-20

CB22-200 Pneumatic Band Saw - Stainless Steel Series

2023-06-16

CR21-015 Heavy Pneumatic Reciprocating Saw

2021-05-10

CC20-630 Pneumatic Chainsaw (3.0 kw Series)

2023-06-14