Talk about the advantages of using a torque wrench

　　Torque multiplier, also called torque wrench multiplier, is a kind of cast balance. This torque multiplier uses a high-energy planetary transmission mechanism as the main drive. It is small in size and light in weight, and it only needs a little effort to operate.

　　The hydraulic torque wrench used in daily use is a kind of hydraulic tool that is flexible in operation and convenient to use. It can be used for machining, but in many cases, it will cause machine failure due to improper operation methods. , So everyone needs to understand the principle of hydraulic wrench operation, the following editor will talk about it with you.

　　First, the improper operation method causes the hydraulic torque wrench to malfunction. For mechanical maintenance, it is necessary to correctly judge the output torque according to the working environment. If you do not understand the operating principle of the hydraulic torque wrench during operation, it will cause the hydraulic torque wrench to malfunction.

　　Second, there is no guarantee for the maintenance of hydraulic torque wrenches. When using a hydraulic torque wrench, experienced masters will generally perform a simple inspection to understand whether there are corresponding problems with the hydraulic torque wrench, but many people do not care about or ignore the maintenance of the hydraulic torque wrench when using it. This will The hydraulic torque wrench is damaged during use.

　　Third, the daily maintenance and periodic maintenance are not in place, and the lubrication treatment is not carried out in time or the damaged parts are replaced, which causes the hydraulic torque wrench to malfunction again.

　　Advantages of torque multiplier:

　　Safety-the use of extension rods will cause danger. Using a torque multiplier can reduce the length of the extension rod and the user's output by 4, 25 or 28 times magnification.

　　Limitation of operating space ------ The use of longer extension rods may not be suitable for use in some work occasions due to space constraints.

　　Accurate ------ The operation with the torque multiplier will be smoother, more stable and more accurate torque can be obtained. In the process of bolt locking, physical expenditure can be reduced. It is quite difficult to fasten and disassemble large-diameter bolts and nuts at power plant electrical maintenance and production, maintenance and installation sites in various industrial sectors, especially in environments where it is difficult for operators to construct (for example, the space around the equipment is small, and it is impossible to use afterburners and various special types. Wrench, etc.), this contradiction is even more prominent.

　　The anti-rebound safety device has the following advantages:

　　1. If accidentally loosened, the torque input device will not suddenly rebound in the operating direction to ensure the safety of the operator;

　　2. There is no anti-rebound safety device, it is often necessary to confirm that there are no obstacles in the 360-degree rotation of the torque device, because obstacles will cause the multiplier to be unusable;

　　3. The anti-rebound safety device cooperates with the reaction force point of the reaction arm of the multiplier to tighten the nut of the multiplier, even if the torque multiplier is used upside down, it can also support the weight of the torque multiplier itself.

Read recommendations:

AK51-080 Pneumatic C-Hog Ring Plier (Charging/Manual 1.5 coil)

OF23-520 Pneumatic Fan (light/medium)

Pipe Fixed Clamps丨CB861-18

Carbide Hollow Bits丨DM816 Series

What are the main points of maintenance of single-phase vortex air pumps